series am6 tw-vz 6 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r 13.b 1 of 3 north america only features: models single output models dual output model input voltage (v) output voltage (v) output current max (ma) capacitive load, max (f) efficiency (%) am6tw - 2412d - vz 9 - 36 12 250 220 79 am6tw - 2415d - vz 9 - 36 15 200 220 79 am6tw - 4812d - vz 18 - 72 12 250 220 75 am6tw - 4815d - vz 18 - 72 15 200 220 77 am6tw - 2412dh35 - vz 9 - 36 12 250 220 79 am6tw - 2415dh35 - vz 9 - 36 15 200 220 79 am6tw - 4812dh35 - vz 18 - 72 12 250 220 75 am6tw - 4815dh35 - vz 18 - 72 15 20 0 220 77 i nput specifications parameters nominal typical maximum units voltage range 24 9 - 36 vdc 48 18 - 72 filter (pi) network start up time 20 ms peak input voltage time 15 ms absolute max rating 24 vin - 0.7 - 40 vdc 48 vin - 0.7 - 80 isolation specifications parameters conditions typical rated units tested i/o voltage 3 sec 1500 (3500 h35 model) vdc resistance > 1000 mohm capacitance 60 pf ? wide input range (4:1) ? operating temperature - 40 o c to + 85 o c ? 2 4 pin d ip package ? input / output isolation 1 5 00 or 3500 v dc ? m etal package ? pin comp a t i ble with multiple manufacturers ? high efficiency up to 79 % ? continuous short circuit protection model input voltage (v) output voltage (v) output current max (ma) capacitive load, max ( f) efficiency (%) am6tw - 2412s - vz 9 - 36 12 500 470 75 am6tw - 2415s - vz 9 - 36 15 400 470 77 am6tw - 4812s - vz 18-72 12 500 470 77 am6tw - 4815s - vz 18 - 72 15 400 470 77 am6tw - 2412sh35 - vz 9 - 36 12 500 470 75 am6tw - 2415sh35 - vz 9 - 36 15 400 470 77 am6tw - 4812sh3 5- vz 18 - 72 12 500 470 77 am6tw - 4815sh35 - vz 18 - 72 15 400 470 77
series am6 tw-vz 6 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r 13.b 2 of 3 north america only output specifications parameters conditions typical maximum units voltage balance balanced load 1 % voltage accuracy 1 % short circuit protection continuous short circuit restart auto recovery line voltage regulation 0.5 % load voltage regulation 0.5 % temperature coefficient 0.02 %/ o c ripple & noise at 20mhz bandwidth 60 mv p - p general specifications parameters conditions typical maximum units s w itching frequency 100% load 1 00 - 400 khz operating temperature full load (see d erating chart) - 40 to +85 o c storage temperature - 40 to +125 o c max case temp era ture 100 o c cooling free air convection humidity 95 % case material nickel coated copper weight 15 g dimensions (l x w x h) tolerance 0.5 mm or 0.02 inches 1. 25 x 0. 8 x 0. 4 inches 31.75 x 20.32 x 10.16 mm mtbf > 2,200,000 hrs (mil - hdbk - 217f, ground benign, t=+25 o c) safety specifications parameters standards designed to meet iec 60950 - 1 note: all specif ications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. pin out specifications pin 1500vdc 3500vdc single dual single dual 1 +v input +v inpu t no pin no pin 2 n.c. - v output - v input - v input 3 n.c. common - v input - v input 9 no pin no pin no pin common 10 - v output common no pin no pin 11 +v output +v output n.c. - v output 12/13 - v input - v input no pin no pin 14 +v output +v output +v output +v output 15 - v output common no pin no pin 16 no pin no pin - v output common 22 n.c. common +v input +v input 23 n.c. - v output +v input +v input 24 +v input +v input no pin no pin
series am6 tw-vz 6 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r 13.b 3 of 3 north america only dimensions 27.94 (1.10) 20.32 (0.80) 2.54 (0.10) printed face built-in stand-offs to ease pcb cleaning 10.16 (0.40) 3.05 (0.12) 0.50 (0.02) 15.24 (0.60) 31.75 (1.25) bottom view 2 3 9 11 14 16 22 23 all dimensions are typical: millimeters (inches) pin diameter: 0.50 0.05 (0.02 0.002) pin pitch tolerance: 0.35 (0.014) case tolerence: 0.5 (0.02) 1 24 10 12 15 13 0.25 (0.01) derating 0 25 75 50 85 100 80 60 40 20 0 85 o c safe operating area free air convection ambient temperature o c 100 -40 output power % note: 1. datasheets are updated as needed and as such, specifications are subject to change without notice. once printed or downloaded, datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary and may not be available for rele ase. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control s ystems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. warranty is in accordance with aimtecs standard terms of sale available at www.aimtec.com.
|
